Cisco Unified IP Phone Power Injector

28.000,00 Kz

In stock

Comparar

Dimensions (H x W x D)

1.6 x 4.6 x 5.45 in. (4.1 x 11.8 x 13.8 cm)

Weight

.66 lb (.30 kg)

Phone casing composition

Polycarbonate acrylonitrile butadiene styerene (ABS) plastic in textured dark gray color

Power requirements

Power is integrated (see Table 5 for country-specific power cords used for connection to AC wall outlet)

Part number

CP-PWR-INJ

LAN connection

• Maximum Ethernet cable length: 100 m from switch to device

• Type: RJ-45

• Label: DATA -Network

Device connection

• Maximum Ethernet cable length: 100 m from switch to device

• Type: RJ-45

• Label: DATA and PWR -PHONE

LEDs

Two-“Power” and “Status”

Stackable

Yes-Two injectors can be stacked

Wired pairs used

Injects power into two unused pairs in the Ethernet cable: 4 and 5 (negative) and 7 and 8 (positive)

Electrical

Input:

• AC input voltage range: 90 to 264 VAC

• AC input current: 0.5A (RMS) @ 90 VAC at maximum load

• AC input frequency: 47 to 63 Hz

• Maximum inrush current: 20A @ 115 VAC, 60 Hz, Cold Start, 25°C
40A @ 230 VAC, 50 Hz, Cold Start, 25°C

Output:

• DC output voltage: 48 VDC nominal

• Maximum output power: 15.5W @ 48 VDC

Performance efficiency:

• 53% minimum at 30-49% of maximum load and 120 VAC, 60 Hz

• 75% minimum at 50-100% of maximum load and 120 VAC, 60 Hz
Be the first to review “Cisco Unified IP Phone Power Injector”

O seu endereço de email não será publicado. Campos obrigatórios marcados com *

Reviews

There are no reviews yet.

Menu

Cisco Unified IP Phone Power Injector

28.000,00 Kz

Add to Cart